Articles & How to Guides

AW Roof Patch: Repairing Splits, Cracks, and Holes in a Metal Roof

Mon, 24 Jul 2023 04:11:58 GMT

AW Roof Patch: Repairing Splits, Cracks, and Holes in a Metal Roof

A metal roof is a durable and long-lasting roofing option. However, over time, it may develop splits, cracks, or small holes due to various factors such as weathering or accidental damage. These issues, if left unaddressed, can lead to leaks and further damage to the roof structure. Fortunately, with the right tools and materials, such as AW Roof Patch, you can quickly and efficiently repair these problems and ensure your roof remains watertight.

Here is a step-by-step guide on using AW Roof Patch to repair splits, cracks, or small holes in a metal roof:

This demonstration is done on a decramastic/pressed steel tile roof that has a split but is the same steps for any metal roof.

1. Safety First: Before beginning any repair work, ensure that you are working on a stable and secure surface. Remember to also wear appropriate safety gear, including gloves, to protect yourself from any potential hazards.

2. Clean the Area: Start by thoroughly cleaning the area surrounding the split, crack, or small hole on the metal roof. Use a wire brush or sandpaper to remove any rust, debris or loose particles, If any. This step is crucial as it will help create a clean surface for better adhesion of the AW Roof Patch.

3. Apply AW Roof Patch: Using a brush, generously apply AW Roof Patch directly onto the split, crack, or small hole, ensuring to extend the patch at least 50mm in all directions from the damaged area. If the hole exceeds 3mm in width, consider using Trito PolyFab embedded in the patch.

4. Complete the Repair: Once you have applied the AW Roof Patch, there is no need to wait for it to dry. The patch is instantly watertight, providing immediate protection against leaks. This is particularly advantageous when combine with the fact that it can be applied on wet or even submerged surfaces. Allowing for emergency repairs to be done in virtually any weather conditions.

By following these steps, you can quickly and effectively repair splits, cracks, or small holes in your metal roof using AW Roof Patch. The instant watertight feature of AW Roof Patch ensures that your repaired roof remains protected from leaks right away.

The AW Roof Patch is designed to retain its flexibility throughout its entire lifespan, as demonstrated by its ability to effortlessly flex when the metal tile is twisted after it has fully cured.

This essential characteristic allows the AW Roof Patch to adapt and accommodate various movements and stresses without compromising its overall integrity and durability.

Take action today and safeguard your assets with AW Roof Patch .

Don't wait any longer, protect your investments now!

To maximize the durability of the patch, it is advisable to apply a topcoat (paint) on top of it. This serves two purposes – it enhances the visual appeal by blending seamlessly with the surrounding area, and it also ensures that the patch will have a lifespan equal to or potentially longer than the original roof. This optional step can be done after the AW Patch has cured for at least a week.

AW Roof Patch: Understanding PolyFab Usage and Proper Application

Tue, 18 Jul 2023 08:46:01 GMT

Applying AW Roof Patch: Understanding PolyFab Usage and Proper Application

This article will guide you through the process of applying AW Roof Patch with PolyFab specifically on plywood external corners. However, bear in mind that the same method can be used for other substrates or whenever PolyFab is necessary.

It is important to note that AW Roof Patch typically does not require the use of PolyFab. Unless it is being applied to plywood joints or other areas with high-stress levels. Additionally, PolyFab is recommended for larger splits, cracks, or holes that measure greater than 3mm.

Materials Needed:

- AW Roof Patch

- Trito PolyFab

- Clean cloth or rag

- Gloves (Nitrile is best)

- Brush for application

- Scissors

- Measuring tape (optional)

Step 1: Prepare the Area

1. Begin by cleaning the external corner thoroughly, removing any loose debris, dirt, or old roofing silicone. A clean surface ensures proper adhesion of the AW Roof Patch, although the surface may be wet.

Step 2: Cut Fiber

1. Measure the external corner's length using a measuring tape.

2. Cut a piece of fiber from the Trito PolyFab material to match the measured length, ensuring it will cover the entire corner appropriately.

3. In the centre of the fiber, create a snip that extends towards the middle of the cut fiber. (as seen in photo)

Step 3: Apply the First Coat of AW Roof Patch

1. Using a brush, apply the first coat of AW Roof Patch along the external corner. Ensure the patch extends slightly beyond the corner onto the adjacent surfaces.

2. Work the roof patch thoroughly into any cracks or gaps in the corner to create a solid foundation for the repair.

Step 4: Place and Smooth the Fiber on one side

1. Immediately after applying the first coat of AW Roof Patch, place the pre-cut fiber onto the patch, ensuring to line it up with the corner.

2. Press the fiber down firmly onto the wet patch, smoothing it out to remove any wrinkles or air bubbles. Only do one side at this time as we need more AW Roof Patch before continuing.

Step 5: Apply Additional AW Roof Patch

1. Dip the brush into the AW Roof Patch and apply a generous amount on top of the fiber, directly between where the fiber will overlap.

2. Carefully press the overlapping part of the fiber onto the fresh patch, ensuring there are no gaps or loose edges.

3. Utilize the brush or gloves to smooth out the fiber and secure it in place. Make sure the corners are properly adhered.

Step 6: Complete the Repair

1. Apply a final coat of AW Roof Patch on top of the entire repaired area, including the fiber and the surrounding patch.

2. Use the brush to spread and smooth the final coat, ensuring a consistent and seamless finish. The AW Roof Patch has some self-smoothing properties that will help remove some of the brush strokes.

3. You may require an additional coat to fully enclose the PolyFab. This can be done after it is mostly dry. Depending on temperature this is usually 6-24 hours but can be quicker.

4. If top coating (Painting) Allow the AW Roof Patch to dry for at least a week before top coating.

To maximize the durability of the patch, it is advisable to apply a topcoat on top of it. This serves two purposes – it enhances the visual appeal by blending seamlessly with the surrounding area, and it also ensures that the patch will have a lifespan equal to or potentially longer than the original roof.

By following these straightforward steps, you can easily apply AW Roof Patch to external corners and effectively repair any leaks or damage. Remember to clean the area thoroughly, cut the fiber, apply the first coat of AW Roof Patch, smooth the fiber, apply additional AW Roof Patch between overlap, smooth off and finish it off with a final coat of AW Roof Patch. Topcoat for extended life and a seamless finish. With careful application, your roof's external corners will be properly repaired and protected from future issues, prolonging the life of your roof.

Take action today and safeguard your assets with AW Roof Patch and PolyFab .

Don't wait any longer, protect your investments now!

Wagon Essentials: Why Tradies Should Carry AW Roof Patch

Mon, 17 Jul 2023 02:42:15 GMT

Wagon Essentials: Why Tradies Should Carry AW Roof Patch

1. Quick and Easy Repairs: AW Roof Patch is a simple and effective solution for fixing roof leaks and damage.

It comes in a convenient can, making it easy to apply and providing a quick fix for any roofing or water-tightness issues.

2. Versatile Application: AW Roof Patch is suitable for use on a wide range of roofing materials, including metal, asphalt, tile, and more.

This versatility means that tradies can use it for a variety of repair jobs, ensuring they always have the right solution on hand.

3. Weather Resistant: AW Roof Patch is designed to withstand extreme weather conditions, including heavy rain, wind, and UV exposure*.

This means that repairs made with AW Roof Patch will be durable and long-lasting, providing peace of mind to both tradies and their customers.

*To maximize the durability of the patch, it is advisable to apply a topcoat on top of it. This serves two purposes – it enhances the visual appeal by blending seamlessly with the surrounding area, and it also ensures that the patch will have a lifespan equal to or potentially longer than the original roof.

4. Cost-Effective Solution: Roof repairs can be expensive, especially if they require a professional contractor.

With AW Roof Patch in their wagon, tradies can provide a cost-effective solution to their customers, saving them both time and money.

5. Emergency Repairs: Roof leaks and damage can occur at any time, including outside of normal business hours.

By having AW Roof Patch in their wagon, tradies can be prepared for emergency repairs and provide immediate assistance to their customers. This can help prevent further damage to the property and minimize potential losses.

6. Reputation and Customer Satisfaction: By having AW Roof Patch in their wagon, tradies can demonstrate their professionalism and preparedness to their customers. Prompt and effective roof repairs can greatly enhance their reputation and customer satisfaction, leading to repeat business and positive referrals.

7. Easy Storage and Transportation: AW Roof Patch comes in compact and portable packaging, making it easy to store and transport in a wagon. This ensures that tradies always have a reliable roofing solution at hand, regardless of the size or location of the job.

In conclusion, having AW Roof Patch in your wagon is essential for all tradies. It provides a quick, versatile, and cost-effective solution for roof repairs, ensuring customer satisfaction, and enhancing their professional reputation. Additionally, it allows tradies to be prepared for emergency repairs and provide immediate assistance to their customers.

TritoFLEX 1K S Product Release

Wed, 12 May 2021 02:15:35 GMT

TritoFLEX 1K S Product Release
May 2021

Triton are proud to introduce TritoFlex 1K S, a spray-grade, single-component synthetic rubber membrane used for roof restoration, roof recover, and below-grade waterproofing. The video here demonstrates this product. It is applied with conventional airless spray equipment widely used in the roof coatings industry.

Triton manufactures stronger, safer, and sensible alternatives to traditional roofing technologies. Institutional and government facilities around the country choose industrial-grade, non-toxic products from Triton to restore and recover their existing roofs.

Our core liquid membrane, TritoFlex 2K synthetic rubber, is a two-component, instant-setting product that requires specialized spray equipment to apply. Triton recognized the need in the waterproofing industry for a single-component, spray-applied version of this renowned product.

CLICK HERE to download the Technical Data Sheet.

Articles & How to Guides

AW Roof Patch: Repairing Splits, Cracks, and Holes in a Metal Roof

AW Roof Patch: Repairing Splits, Cracks, and Holes in a Metal Roof

AW Roof Patch: Understanding PolyFab Usage and Proper Application

Applying AW Roof Patch: Understanding PolyFab Usage and Proper Application

Wagon Essentials: Why Tradies Should Carry AW Roof Patch

Wagon Essentials: Why Tradies Should Carry AW Roof Patch

TritoFLEX 1K S Product Release

TritoFLEX 1K S Product Release May 2021

TritoFLEX 1K S Product Release
May 2021